language

Новости

How to Avoid Blisters in Aluminum Alloy Die Castings

July 14,2022

Aluminum alloy die-casting is a part of working pressure forging. It is a working pressure casting mechanical aluminum die-casting machine equipped…

Quality Problems Encountered in Nodular Cast Iron Casting Production

July 14,2022

General rules affecting shrinkage porosity of ductile iron Modulus of ductile iron castings. The modulus of the casting is greater than 2.5, so…

What Are the Processing Characteristics of Aluminum Alloy Die Castings

July 14,2022

The reason for the immediate shortcomings of aluminum alloy die-casting is generally due to the wrong planning and plan of the abrasive tool and…

What Tools are Needed in the Process of Cast Iron Processing?

July 14,2022

Cast iron can be classified into; Grey cast iron, white cast iron, malleable cast iron, nodular cast iron, vermicular cast iron, alloy cast iron, etc.…

What Are the Requirements for the Processing Stability of Aluminum Alloy Die Castings

July 14,2022

So how can we control the temperature very well? In fact, it is not difficult. For example, the capacity of the abrasive tool cannot be very large or…

Talking about the Film in Cast Iron(2)

July 14,2022

In general, the above results well explain some phenomena observed in cast iron factories. For general grade gray cast iron, the surface of molten…

Talking about the Film in Cast Iron(1)

July 14,2022

When the molten iron is kept at a high temperature (1500 ℃) in a furnace or a molten iron ladle lined with traditional refractory materials such as…

How to Deal With Small Shrinkage Holes on the Surface of Aluminum Alloy Die Castings

July 14,2022

Aluminum alloy die castings themselves have hard points: One is that after the raw materials of aluminum alloy die-casting parts…

Heat Treatment of White Cast Iron

July 14,2022

White cast iron has high hardness, can not be cut, and is very brittle, so it is rarely directly used to manufacture machine parts. Generally…

What Are the Relevant Characteristics of Aluminum Alloy Die Castings

July 14,2022

Aluminum alloy die-casting is a part of working pressure forging. It is a working pressure casting mechanical aluminum die-casting machine equipped…

What Are the Components of the Die Casting Mold

July 14,2022

The die-casting part is composed of two parts, one for covering and one for theme activity, and the part where they merge is called the analysis line.…

Die Casting Parts Under the Die Casting Process

July 14,2022

Aluminum die casting is a metal material forging process, which is characterized by the use of an abrasive cavity to release high pressure on the…

Связаться с нами

Имя

Имя can't be empty

* Эл. адрес

Эл. адрес can't be empty

Телефон

Телефон can't be empty

Компания

Компания can't be empty

* Сообщение

Сообщение can't be empty

Представлять на рассмотрение

ТЕГИ ПРОДУКТА